Wednesday, 21 May 2014
The Makita BHP 453RFX motor delivers 560 in. lbs. of
efficient torque in a compact design at only 9-7/8" length and weighs
only 4.9 lbs. for less operator fatigue. The ergonomic shape fits like a
glove with even pressure and easy control. The LXT Lithium-Ion powered
battery provides longer run time and 5x lower self-discharge. With a
45-minute Optimum Charger process which communicates throughout the
charge using the built-in chip in the battery and built-in CPU chip in
the charger.
Features:
Features:
- 2 Mechanical gears
- Electronic brake control
- Forward/reverse
- Variable speed trigger
- Double end Ph Bit
- 1 x 3Ah li-ion battery
- Fast Charger
- Double End PH Bit
- Aluminium case
Marking System Cutting Wheels
Marking System Cutting Wheels
| 1. | Designation; |
| 2. | Max. operating speed / permissible rotation speed; |
| 3. | Wheel dimensions: mm/inch; |
| 4. | Barcode; |
| 5. | Hazard symbols; |
| 6. | Wheel characteristics: old marking system/new marking system; |
| 7. | Date of manufacture and logo; |
| 8. | Supplier information. |
Advantages for Retailers
The need for high-quality abrasive wheels is growing with the growth of construction and repair works. UK Planet Group is focused only on the production of resinoid cutoff wheels and all the resources and attention is given to this area which guarantees the quality and reliability of each item of our products.UK Planet Group uses the world’s best Italian equipment, the most advanced production technology. In the process of production of abrasive cutoff wheels influence of the human factor is minimized by full automation of the production process. Stable and excellent quality of abrasive wheels is also ensured by the best raw materials from European manufacturers – partners of our plant.
You can see a number of pictures that represent our production and the conditions in which the RESINOID CUT-OFF WHEELS are made.
Stages Of Production
1. Cutting down grids on the automatic press:
 |
2. Preparation of the abrasive mixture:
 |
3. Wheel production on the press:
 |
4. Kiln process:
 |
PRODUCTS QUALITY
UK Planet Group gives priority to quality of cut-off and grinding wheels. Multi-stage quality control makes it possible to achieve the rates at which defected products are almost completely eliminated. It is equally important that each abrasive wheel exiting our Company conforms to the highest quality standards. How is this accomplished? By monitoring every stage of production, automated and technologic process control types.What makes the WellCut cut-off wheels one of the best??
- High technology combined with the best equipment and skilled engineers and workers give the best result;
- Extensive experience of foreign manufacturers in combination with in-house developments increases strength and reliability of wheels;
- Rigid control system using the special equipment to test each batch and continuous quality control of cutting properties of our wheels.
STAGE 1 - INCOMING CONTROL OF RAW MATERIALS In addition to the guaranteed impeccable quality of the raw materials for abrasive wheels from Austria and Germany the plant carries out extra quality control of raw materials:
- High-precision laboratory equipment allows to define and control the basic parameters of phenol resins;
- Fractional and chemical analysis of components.
STAGE 2 - MIXES PREPARATION CONTROL Accuracy in the preparation of mixes, the right humidity parameters is the key to the quality of the abrasive cutoff wheel. Given that the cutting of metal, stone, concrete and other materials requires certain properties of the wheel, this stage of control is the basis for the subsequent processing and manufacture of quality products.
STAGE 3 - CONTROL WITHIN PRODUCTION ON PRESS
The important parameters of the future abrasive wheel are weight and dimensions. At this stage of production cutoff wheels are checked for the following values:
- Wheel weight;
- Compliance of the wheel parameters (thickness and diameter) with the given values in accordance with the technical documentation;
- Imbalance magnitude.
STAGE 4 - CRACK TEST AFTER FIRING
This is the most important of the tests defining safety of abrasive wheels. According to the international standard resinoid wheels have permissible rotation rate of 12,250 rev/min, the crack test takes place with a 2-fold increase in the load on a special stand. Each batch of wheels is tested.
Control cut is made by the wheels from each batch. In such a way we guarantee that durability of our abrasive wheels is highly competitive with the wheels of expensive brands. We check wheels from each batch to guarantee buyers stable, unchanging quality of WellCut wheels.
Drywall Fiberglass Joint Tape 50mm*90m is a building material that
made with a unique cross-fiberglass construction to provide greater
drywall joint strength, used to cover seams in the process of drywall
construction.
This product has good performances like good softness, high
stickiness, and easy application. The drywall tape is the ideal material
to giving you the best solution for wall and ceiling problems.
Drywall
tape can also be used to seal corners where two sections of drywall
meet. It gives a smooth surface that looks as bright as new.
Features of fiberglass drywall wall tape:
- Good performance of alkaline-resistance;
- High tensile strength and deformation resistance;
- Excellent self-adhesive performance;
- Well arranged; Simple and easy to be applied.
- PRIVATE LABEL AVAILABLE
We can make any size, any grade, any colour
Application:
- Doorframes and windows mounting
- Heat insulation of water systems, sewage systems and central heating systems
- Fixing and insulating of wall panels, division walls, driver’s cabs and boats.
- Connecting of wooden prefabricated elements in frame constructions.
- Heat insulation of roofs and floors.
- Filling of gaps in the building heat insulation.
Subscribe to:
Posts (Atom)